Track My Order
Frequently Asked Questions
International Shipping Info
Send Email
added to your cart!
The SparkFun Pulse Oximeter and Heart Rate Sensor is an incredibly small, I2C based, Qwiic-enabled biometric sensor.
The ENS160 is a digital multi-gas sensor solution with four sensor elements that can be used in a wide range of air quality a…
This great GT-521F52 fingerprint module from ADH-Tech communicates over TTL Serial so you can easily embed it into your next …
This is a 10 pack of Biomedical Sensor Pads, disposable electrodes that can be used to measure EEG, ECG and EMG levels. these…
The AD8232 SparkFun Single Lead Heart Rate Monitor is a cost-effective board used to measure the electrical activity of the h…
The SparkFun Photodetector Breakout is an updated version of the Particle Sensor Breakout including the MAX30101, a highly se…
The SparkFun Qwiic MicroPressure Sensor is a mini breakout equipped with Honeywell's MPR Series piezoresistive silicon 25psi …
Heart rate data can be really useful whether you're designing an exercise routine, studying your activity or anxiety levels o…
This is your simple three conductor sensor cable with electrode pad leads. These cables are 24" long and feature a 3.5mm audi…
The MyoWare® 2.0 Muscle Sensor is an Arduino-powered, all-in-one electromyography (EMG) sensor from Advancer Technologies an…
This is a simple-to-use liquefied petroleum gas (LPG) sensor, suitable for sensing LPG (composed of mostly propane and butane…
The SparkFun SGP40 Air Quality Sensor provides a measurement of the quality of the air in your room or house.
This is a simple-to-use compressed natural gas (CNG) sensor, suitable for sensing natural gas (composed of mostly Methane [CH…
A simple breakout for measuring the moisture in soil and similar materials. The exposed pads function together acting as a va…
The MyoWare® 2.0 Link Shield is designed to easily connect a MyoWare® 2.0 Muscle Sensor to your Arduino via a 3.5mm TRS-to-…
The SparkFun SGP30 Air Quality Sensor monitors the VOCs around you and can return valid indoor air quality readings within 15…
The MyoWare® 2.0 LED Shield is designed to display the magnitude of a target muscle's signal and power the MyoWare 2.0 Muscl…
This great GT-521F32 fingerprint module from ADH-Tech communicates over TTL Serial so you can easily embed it into your next …
The MyoWare® 2.0 Power Shield is designed to easily power the MyoWare 2.0 Muscle Sensor remotely.
The MyoWare® 2.0 Arduino Shield is designed to easily connect up to six MyoWare 2.0 Muscle Sensors and Link Shields using 3.…
Thanks to the SparkFun gator:soil micro:bit Accessory Board, you can now measure the moisture level in soil without any vocal…
This is an advanced air quality sensing device that combines multiple metal-oxide sensing elements on a chip to provide detai…
The AS-108M fingerprint sensor module is a combination fingerprint scanner and MCU and provides a UART interface port for eas…
The MyoWare® 2.0 Reference Cable is meant as an extension for the MyoWare 2.0 Muscle Sensor's reference pin. This is a pack …
The SparkFun gator:particle incorporates the powerful MAX30102 sensor, enabling sensing of pulse oximetry, heart rate, monito…
This is a simple-to-use hydrogen gas sensor, suitable for sensing hydrogen concentrations in the air.
This is a simple-to-use Carbon Monoxide (CO) sensor, suitable for sensing CO concentrations in the air.
This alcohol sensor is suitable for detecting alcohol concentration on your breath, just like your common breathalyzer.
The MyoWare 2.0 Cable Shield allows you to test and use the MyoWare 2.0 Muscle Sensor without actually attaching the board to…
With the Gas Sensor Breakout you will be able to utilize each oversized, oddly spaced pins featured on every MQ gas sensor pr…
The MyoWare® 2.0 Reference Cable is meant as an extension for the MyoWare 2.0 Muscle Sensor's reference pin.
The Kitronik Smart Air Quality Board for Pico provides a complete air monitoring and reporting solution for the Raspberry Pi …
MIKROE Alcohol Click has a high sensitivity to alcohol and it can be used to detect alcohol in concentrations from 0.04 to 4m…
MIKROE EEG Click is a Click board™ that allows monitoring of brain activity.
Track the patterns of your beating heart with ECG 2 Click.
This is the MyoWare Proto Shield, a simple proto-board for your MyoWare Muscle Sensor. With this shield you will be able to u…
MIKROE Oximeter 3 Click is a compact add-on board perfectly suited for measuring the blood oxygen saturation.
Sharp's GP2Y1010AU0F is an optical air quality sensor, designed to sense dust particles. An infrared emitting diode and a pho…
MIKROE ECG/GSR Click is a compact add-on board representing a complete solution for the development of ECG and GSR applicatio…
The MyoWare LED Shield is designed to pair with the [MyoWare Muscle Sensor](https://www.sparkfun.com/products/13723). The blu…
The Pulse Rate Sensor is a plug-and-play heart-rate sensor.
This board carries the iAQ-Core Indoor Air Quality sensor that measures VOC levels and provides CO2 equivalent and TVOC equiv…
MIKROE Fingerprint 3 Click bundle - Build a capacitive fingerprint scanner solution with a two-color ring indicator.
This is an ECG (or EKG) machine on a Click board™.
Heart Rate 3 Click is a mikroBUS add-on board.
Heart Rate 5 Click is the optical biosensor Click board™.
